Refractive errors Overview of Refractive Disorders In refractive disorders, light rays entering the eye are not focused on the retina, causing blurred vision. The shape of the eye or cornea or age-related stiffness of the lens may decrease the... read more can be corrected with glass or plastic lenses mounted in a frame (eyeglasses) or with a small lens made of plastic floating or resting on the cornea (contact lens). Good vision correction is possible with both eyeglasses and contact lenses. For most people, the choice is a matter of appearance, convenience, cost, risk, and comfort.
Eyeglass lenses can be made of either plastic or glass.
Plastic lenses for eyeglasses are lighter but are more likely to scratch. These lenses are more commonly used than glass because they are thinner and can also be coated with a substance that helps them resist scratches.
Glass lenses for eyeglasses are more durable than plastic but are more likely to break, potentially causing injury.
Both glass and plastic lenses can be tinted or treated with a chemical that darkens them automatically when exposed to light. Lenses can also be coated to reduce the amount of potentially damaging ultraviolet light that reaches the eye.
Bifocals are eyeglasses that contain two lenses—an upper lens that corrects the view of distant objects and a lower lens that corrects the view of nearby objects, such as reading material. However, people also need to focus at middle distances, such as when viewing a computer screen. Trifocals are eyeglasses that meet this need because they contain a third lens for middle distance. Continuously variable lenses (progressive lenses or no-line bifocal lenses) also permit focusing at middle distances and have a cosmetic advantage in that there is no line or sharp division between the regions of the eyeglass lens.
Many people think contact lenses allow them to be more active or make them feel more attractive than when wearing eyeglasses. Some people think that vision is more natural with contact lenses. However, contact lenses require more care than eyeglasses and, rarely, they can damage the eye. Some people, particularly older people and people with arthritis, may have trouble handling contact lenses and placing them in their eyes.
Contact lenses provide better peripheral vision (how much is seen at the corners of the field of vision) than do eyeglasses.
Contact lenses can be made that correct for different visual problems (such as distance and close-up vision) in different parts of the lens. These are so-called bifocal or multifocal contact lenses.
Contact lenses can correct
Aniseikonia (a difference in image size)
Aphakia Causes In refractive disorders, light rays entering the eye are not focused on the retina, causing blurred vision. The shape of the eye or cornea or age-related stiffness of the lens may decrease the... read more (after removal of a cataract if no implant to replace the eye's natural lens was inserted at the time of surgery)
Either soft or rigid (hard) contact lenses are used to correct nearsightedness and farsightedness. Soft toric lenses (which have different curvatures molded onto the front lens surface) or rigid contact lenses can correct astigmatism, but require expert fitting.
Presbyopia In refractive disorders, light rays entering the eye are not focused on the retina, causing blurred vision. The shape of the eye or cornea or age-related stiffness of the lens may decrease the... read more can also be corrected with contact lenses. In one approach, called monovision, one eye is corrected for reading and the other is corrected for distance vision. However, some people have difficulty adjusting to monovision. Another approach is to wear a bifocal or multifocal contact lens in each eye.
Neither rigid nor soft contact lenses offer the eyes the protection against a blunt or sharp injury that eyeglasses do.
Rigid contact lenses, which are usually gas-permeable, are thin disks made of hard plastic. They are smaller than soft contact lenses and cover only part of the cornea. Oxygen, which the cornea needs to function properly, did not pass easily through the plastic of the older style hard contact lenses. Modern gas-permeable contact lenses (GPCLs), which are made of plastics such as newer fluorosilicone acrylate compounds, permit more oxygen to reach the cornea. Rigid contact lenses can be used to correct nearsightedness, farsightedness, and irregularities in the cornea (astigmatism and keratoconus).
GPCLs can be designed to fit the eye exactly. They usually require some time for the eye to adapt to their presence and need to be worn for about 4 to 7 days before they feel comfortable for a prolonged period. The contact lenses are worn for a gradually increasing number of hours each day. Although rigid contact lenses may be uncomfortable at first, they should not be painful. Pain usually indicates an improper fit. People who wear GPCLs may have temporary (less than 2 hours) blurred vision when they put eyeglasses on after removing the contact lenses. Vision with rigid contact lenses is usually sharper than vision with soft contact lenses, particularly in people with astigmatism.
Soft hydrophilic (water-absorbing) contact lenses are made of flexible plastics and are 30 to 79% water. They are larger than rigid contact lenses and cover the entire cornea. Soft contact lenses can be used to correct nearsightedness, farsightedness, astigmatism, and presbyopia. Not all soft contact lenses allow oxygen to reach the cornea easily.
Because they are larger, soft contact lenses are less likely than rigid contact lenses to fall out or to allow dust and other particles to get trapped underneath. In addition, soft contact lenses are usually comfortable from the first wearing. Soft contact lenses require scrupulous care to prevent problems, because the risk of infection is higher with soft contact lenses than with rigid contact lenses. When dry, soft contact lenses are brittle and break easily.
Contact lenses should be removed and cleaned every day using a contact lens disinfecting solution. Tap water should never be used, particularly to clean soft or gas-permeable contact lenses. After cleaning, all contact lenses should be stored in a disinfectant solution in a contact lens case overnight. Wearing contact lenses longer than recommended or longer than the eye can tolerate can cause eye redness Eye Redness Eye redness refers to a red appearance of the normally white part of the eye. The eye looks red or bloodshot because blood vessels on the surface of the eye widen (dilate), bringing extra blood... read more , watering Eyes, Watery Excess tearing may cause a sensation of watery eyes or result in tears falling down the cheek. Other symptoms, such as eye irritation or pain, may be present depending on the cause. Most tears... read more , and light sensitivity Light Sensitivity A number of other symptoms and problems can affect the eyes, including changes in the appearance of the eyes, color blindness, dry eyes, glare and halos, impaired depth perception, itchy eyes... read more (called contact lens overwear syndrome or contact lens overuse syndrome). Once the lenses are removed, these symptoms tend to resolve over a day, but symptoms that continue longer could be a sign of a more serious infection.
After the lenses are inserted the next day, 100% of the disinfectant solution should be removed from the lens case. The lens case is then placed in a cabinet or drawer and allowed to dry by leaving it open to the air. The case should not be left open on the counter top around the sink in the bathroom because tiny droplets that disperse after brushing teeth or flushing the toilet may contain microorganisms and can settle in the case and start an infection. The lens case should be replaced every 1 to 2 months.
Did You Know...
Some contact lenses require weekly treatment with an enzyme cleaner. Daily disposable contact lenses are discarded after a day of use. Some regular or disposable soft contact lenses are designed so that they may be kept in the eye during sleep for a number of days (extended wear). Most can be kept in place for up to 7 days, but newer contact lenses are available that can be kept in place for up to 30 days. However, the risk of infection is much higher with contact lenses that are worn overnight. Therefore, it is best to remove contact lenses before going to sleep.
Wearing contact lenses poses a risk of serious, vision-threatening, painful complications, including the formation of ulcers on the cornea. Corneal ulcers Corneal Ulcer A corneal ulcer is an eye infection that causes an open sore on the cornea (the clear layer in front of the iris and pupil). Contact lenses, injuries, disorders, drugs, and nutritional deficiencies... read more can be caused by bacteria, viruses, fungi, or amoebas and can cause loss of vision. The risks can be greatly reduced by following the eye doctor's instructions and using common sense.
The risk of serious infections increases when people swim or shower while wearing their contact lenses and clean their lenses with homemade saline solution, saliva, tap water, or distilled water. Sleeping while wearing any type of contact lens also greatly increases the risk of serious infections. The risk of infection increases for every night a person sleeps in soft contact lenses. The best way to reduce the risk of infection is to not sleep in contact lenses, disinfect correctly, and not expose the contact lens to tap water. If a person has intense eye pain, excessive watering of the eye, pain with exposure to light, vision changes, or eye redness, the contact lenses should be removed immediately. If the symptoms do not resolve quickly, the person should contact an eye doctor.